Y790s

YunSDR Y790s

Frequency range:1MHz–6GHz; 8-channel full-duplex with 400MHz real-time bandwidth,single channel up to 2GHz; 200G high-speed data interface, PCIe 3.0 card, abundant FPGA logic resources; Ready-to-use toolkit for RF acquisition, recording and playback; Rich cross-platform APIs supporting MATLAB, Python, C#, C/C++; Integrated GNU Radio environment, supports open-source 4G/5G protocol stacks

document

Software defined Radio for 6G

In stock:

contact

＞1, ready to ship in 2 workdays

ꁆ ꁇ

.

Home ꄲ Products ꄲ Y790s

Overview
Product Information
Documentations
Related Products

Overview

Applications

· Wireless access

· Test and measurement

· Early warning/radar

· Cable TV access

· Other high-performance RF applications

YunSDR Y790s is a high-performance, multi-channel SDR platform based on the 3rd Gen Xilinx Zynq UltraScale+ RFSoC. It offers up to 2GHz instantaneous bandwidth and a 1MHz-6GHz frequency range. The platform supports 8 independent Tx/Rx channels (400MHz bandwidth) or a single-channel 2GHz mode. It features a 14-bit, 5GSPS ADC and a 14-bit, 9.85GSPS DAC. Data I/O includes 2x 100G optical fibers and PCIe 3.0 x16 for real-time host interaction. Standard control/debugging interfaces (USB-JAG, Ethernet, TF card, USB3.0) and a 12V DC power supply are also provided.

Product Description

Main features and interfaces

· High performance, channel density, and high integration

· Two development modes: standalone mode (embedded) or host mode (100G to PCIe streaming mode)

· 1 MHz to 6GHz frequency range (expandable to millimeter wave frequency band)

· Maximum 2GHz instantaneous bandwidth or eight channel 400MHz mode

· 8 channels for transmission and 8 channels for reception

· Xilinx Zynq-Ultrascale+ ZU47DR RFSoC

· 14 bit ADC, 14 bit DAC

· The IQ sampling clock can reach up to 1GSPS, while supporting 983.04MSPS and 960MSPS

· Four core ARM Cortex-A53 processor, with a maximum clock speed of 1.2 GHz

· Four core ARM Cortex-A5 MPCORE processor, with a maximum clock speed of 500 MHz

· 2 QSFP28 optical ports (supporting 40G/100G Aurora and custom protocols)

· SFP+ optical port (supporting 1G/10G Ethernet)

· Provide PCIe fronthaul acceleration card, PCIe Gen3 x 16 interface, Xilinx Kintex Ultra Scale+KU15P FPGA, 2 QSFP28 optical ports

· Gigabit Ethernet RJ45

· Reference clock input/output

· Trigger signal input/output

· Built-in GPS module

· FPGA GPIO interface

· USB 3.0 Host/Device Interface

· Type C USB port serial console, JTAG

The YunSDR Y790s integrates 8 Tx and 8 Rx channels into a compact chassis, ideal for field testing. Each channel is independent, allowing tuning to different frequencies for FDD applications or multi-signal simulation. Channels can be synchronized via an internal OCXO, and an internal GPS module provides time stamping, a 122.88MHz reference, and PPS.Out-of-the-box software supports device self-test, spectrum analysis, and record/playback for rapid wireless troubleshooting. Drivers support GNU Radio and other open-source projects, plus FPGA development. This enables rapid prototyping and reliable deployment of SDR applications like 5G base stations, signal intelligence, and spectrum monitoring.

Product Information